Wyred4Sound STI-500 and STI-1000 w/ WBT Binding Posts and Kimber Wire!! - integrated amp -

Click image to enlarge

$2,149.00

(By Wyred 4 Sound)

Out of stock

 The Wyred4Sound STI-500 and STI-1000 include much of the same hardware and circuitry, of their acclaimed separates.  Not only that, but paired with a Wyred4Sound DAC put you directly into the high-end at very little cost.  They also possess the prodigious output that class D affords.  Either amp will just smile at most difficult loads.  They are $1999 and $2499 respectively.  We only sell them in New England and respect other dealer's territories.  Please Contact W4s for a list or to deal with them directly if you're not in our area.

Here's what W4S has to say:

W4S STI-500/1000 INTEGRATED

The new STI series integrated amplifiers offer unbelievable value, and sonics that rival units costing many times more.

If you're looking for the best deal on an integrated amplifier which also provides the resolution and clarity as those costing many times over, look no further.  An extremely wide sound stage and imaging that takes you to the music are just a few attributes of our latest creation.  Many of the features derived from the STP preamp have given this unit an edge that many others are looking for.

 

It all starts with our proprietary fully balanced dual FET unity gain buffers on the front end to welcome incoming signals.  Our true resistive-ladder volume control is fed from the FET input stage and offers exceptional tracking.  Our line stage that couples the amplifier to the front-end offers a balanced output regardless of the selected 

 

input.  This offers much better common-mode rejection, and a quieter background.   

Some features the STI series have that others don't is the same HT bypass feature as the STP, and a loop through feature.  Like the STP, you can connect a DC trigger cable to your Pre/Pro (and set-up the proper input in the setup menu) to automatically configure the unit for HT use.  When an input is selected to be used as the HT input, the DC trigger can be activated by your Pre/Pro to “power up” the unit, and automatically set the volume to unity gain.  This allows for all volume controls to be made through the surround processor.  When the processor is shut down, so is the STI and connected gear through the DC trigger output.  When 2ch listening is desired, then manual operation can be executed from the front of the unit, or through the remote.


 

With a set of balanced inputs, 4 sets of unbalanced inputs and a set of unbalanced outputs, connection possibilities are vast.  Absolute phase and balance control are easily selected through the supplied remote for those out of phase recordings, and room adjustments to be made on the fly.  

 

 

User interface is made easy with the VFD display and optical rotary encoder.  Allowing input naming and HT Bypass input selection, the setup menu is easily accessed for customization.  Several display dimming steps including “off” are available through the remote for stealth operation.  Powering up the unit can be done several ways, by pushing in on the volume knob (power button), by pressing power on the remote, or by the remote DC trigger input when HT Bypass is selected in the setup menu. 

 

 


 

What are you waiting for? 

Rediscover your music, Wyred 4 Sound, Just listen....


 

 

STI-500 Specifications:

Typical Distortion

THD+N (10W out)

0.005%

Channel Tracking (All Steps)

< +/- 0.05 db

Crosstalk (20-20kHz)

>77 db

8Ω power per channel (0.2%)

250w

4Ω power per channel (0.2%)

550w

 

Frequency Response

(20-20kHz / 2V)

+/- 0.3 db

Lower Bandwidth

3.3Hz all loads

IMD

0.0005 %

Gain

0-39 db

Output Impedance

0.005 Ω

Idle power consumption

25 w

Efficiency

80 % (4Ω)

 Input Impedance

60.4kΩ

Sensitivity

0.55 V RMS

 

Unit Features: 

  • Vacuum Fluorescent Display (VFD)
  • Optical rotary encoder (volume knob / power button)
  • Fully functional remote control
  • 12V DC Trigger input (to automatically activate HT Bypass mode)
  • 12V DC Trigger output
  • Home Theater bypass (customizable for any input, also DC Trigger input selected)
  • Balance control
  • Absolute phase control (0°/180°)
  • Efficient (little heat)
  • Extremely low noise floorTrue Resistive-Ladder volume control
  • Unbalanced to Balanced conversion (when RCA inputs are selected)
  • Extremely low Idle power consumption
  • Rugged construction
  • ½” Machined and Anodized front panels
  • 60kΩ input impedance
  • 4 sets of gold plated unbalanced (RCA) inputs
  • 1 set of gold plated unbalanced (RCA) outputs (For use with a powered sub, etc.)
  • 1 set of Neutrik Balanced (XLR) inputs
  • Factory Selectable mains 115/230VAC
  • Compact size (17”W x 4”H x 14.5”D)
  • TBD lbs.
  • Covered by a 5 YEAR WARRANTY (Original Purchaser)

STI-1000 Specifications:

STI-1000 Specifications:

Typical Distortion

THD+N (10W out)

0.008%

Channel Tracking (All Steps)

< +/- 0.05 db

Crosstalk (20-20kHz)

>85 db

8Ω power per channel (0.2%)

570w

4Ω power per channel (0.2%)

1,140w

 

Frequency Response

(20-20kHz / 2V)

+/- 0.4 db

Lower Bandwidth

3.3Hz all loads

IMD

0.0005 %

Gain

0-39 db

Output Impedance

0.005 Ω

Idle power consumption

35 w

Efficiency

78 % (4Ω)

 Input Impedance

60.4kΩ

Sensitivity

0.75 V RMS

 

Unit Features: 

  • Vacuum Fluorescent Display (VFD)
  • Optical rotary encoder (volume knob / power button)
  • Fully functional remote control
  • 12V DC Trigger input (to automatically activate HT Bypass mode)
  • 12V DC Trigger output
  • Home Theater bypass (customizable for any input, also DC Trigger input selected)
  • Balance control
  • Absolute phase control (0°/180°)
  • Efficient (little heat)
  • Extremely low noise floor
  • True Resistive-Ladder volume control
  • Unbalanced to Balanced conversion (when RCA inputs are selected)
  • Extremely low Idle power consumption
  • Rugged construction
  • ½” Machined and Anodized front panels
  • 60kΩ input impedance
  • 4 sets of gold plated unbalanced (RCA) inputs
  • 1 set of gold plated unbalanced (RCA) outputs (For use with a powered sub, etc.)
  • 1 set of Neutrik Balanced (XLR) inputs
  • Factory Selectable mains 115/230VAC
  • Compact size (17”W x 4”H x 14.5”D)
  • TBD lbs.
  • Covered by a 5 YEAR WARRANTY (Original Purchaser)

 

 

 

 


 

You may also like

Search

0 items in bag

No items in shopping bag